Lock Out / Tag Out Safety (LOTO)

LOTO Safety

 

The "Lockout/Tagout (LOTO)" procedure is a safety protocol used to prevent accidental or unintended startup of machinery and equipment during maintenance or servicing activities. The guidelines for electrical safety under LOTO include the following:

1
  Authorized personnel: Only trained and authorized employees should perform LOTO procedures.
2
  Locks and tags: Locks and tags should be used to physically prevent the activation of energy isolating devices.
3
  Energy isolation: All sources of hazardous energy must be identified and isolated before maintenance or servicing activities are performed.
4
  Verification of isolation: Before work begins, authorized employees must verify that the equipment is properly isolated and de-energized.
5
  Written procedures: A written LOTO procedure should be in place and followed by all authorized personnel.
6
  Group LOTO: In some cases, multiple workers may need to work on the same equipment. In these cases, a "group LOTO" procedure should be established to ensure the safety of all workers.
7
  Regular review: The LOTO procedure should be reviewed regularly to ensure its effectiveness and to identify areas for improvement

 

LOTTO / Tagout Periodic Inspection Form

References: 

NPSINST 6055.1 NPS Hazardous Energy Control Program

29 CFR 1910.147, The Control of Hazardous Energy (lockout/tagout)

OPNAVINST 5100.23 Chapter 24, The Control of Hazardous Energy